欢迎访问重庆大学材料科学与工程学院院!
所在位置: 网站首页 > 师资队伍 > 教工名录 > 正文
教工名录

张宇


系所:中心实验室

职称:副教授

职务:教师

学位:博士

邮箱:yu.zhang@cqu.edu.cn

学习工作经历

[2006.09-2010.06 四川大学制造科学与工程学院,材料成型及控制工程专业,工学学士

2010.09-2017.06 上海交通大学材料科学与工程学院,材料科学与工程专业,工学博士

2014.04-2016.08 澳大利亚蒙纳士大学材料工程系,材料工程专业,博士

2018.07-2020.07 重庆大学材料科学与工程学院,博士后

2020.08-2021.08 重庆大学材料科学与工程学院,讲师

2021.09-至今 重庆大学材料科学与工程学院,副教授]

社会兼职

全国镁合金青年委员会会员

Scientific Reports, Materials Science and Engineering A, Scientific Report, Journal of Materials Science and Technology, Journal of Magnesium and AlloysSCI期刊审稿人 

主讲课程

本科生课程:X射线衍射与电子显微学

主要研究方向

先进镁合金成分设计与析出相变机理

先进电子显微技术在材料研究中的应用

科研项目

国家自然科学基金青年科学基金,基于孪生调控时效硬化型Mg-Gd(-Ag/Zn)合金沉淀相析出行为的研究,主持

重庆市博士后研究人员科研项目特别资助,镁钆系合金孪晶-析出相结构与力学腐蚀性能协同调控,主持

中国博士后科学基金面上资助,高性能镁钆合金柱面与基面强化相同步析出与强化机理,主持

重庆市人力资源与社会保障局,重庆市留(来)渝资助,主持

国家重点研发专项项目,先进结构材料多时空大尺寸跨尺度高通量表征技术及应用,主研

国家自然科学基金联合基金集成项目,稀土镁合金大型复杂铸件制造过程均匀组织与强韧化调控基础研究,主研

国家自然科学基金面上项目,耦合孪生变形与时效调控镁合金析出相晶体学的机理研究,主研

国家自然科学基金面上项目,钛合金双相组织中滑移启动和传递机制的原位SEM-EBSD研究,主研

国家自然科学基金面上项目,Ti颗粒增强镁基复合材料的梯度界面调控及异构机理研究,主研

论文/专著/专利

[1] Y. Zhang*, W. Rong, Y.J. Wu, L.M. Peng*. Achieving ultra-high strength in Mg-Gd-Ag-Zr wrought alloy via bimodal-grained structure and enhanced precipitation [J]. Journal of Materials Science & Technology, 2020, 54: 160-170.

[2] Y. Zhang*, W. Rong, Y.J. Wu*, L.M. Peng. Tuning texture and precipitation using Y/Gd atomic ratio in iso-concentration Mg-Y-Gd-Ag-Zr extruded alloys [J]. Materials Characterization, 2020, 167: 110473.

[3] Y. Zhang*, W. Rong, Y.J. Wu, L.M. Peng*, J. F. Nie, N. Birbilis. A detailed HAADF-STEM study of precipitate evolution in MgGd alloy [J]. Journal of Alloys and Compounds, 2019, 777: 531-543.

[4] X.W. Heng, Y. Zhang*, W. Rong, Y.J. Wu, L.M. Peng*. A super high-strength Mg-Gd-Y-Zn-Mn alloy fabricated by hot extrusion and strain aging [J]. Materials & Design, 2019: 107666.

[5] S.X. Wang, Y. Zhang*, L.M. Peng*. On the evolution of precipitate during creep in a Mg-3.3Y-0.1Zr (at.%) alloy [J]. Materials Characterization, 2019, 147: 414-420.

[6] Y. Zhang*, W. Rong, Y.J. Wu, L.M. Peng*, J. F. Nie, N. Birbilis. A comparative study of the role of Ag in microstructures and mechanical properties of Mg-Gd and Mg-Y alloys [J]. Materials Science and Engineering A, 2018, 731: 609-622.

[7] Y. Zhang, P. Gore, W. Rong, Y. J. Wu, Y. M. Yan, R. F. Zhang, L. M. Peng*, J. F. Nie, N. Birbilis*. Quasi-in-situ STEM-EDS insight into the role of Ag in the corrosion behaviour of Mg-Gd-Zr alloys [J]. Corrosion Science, 2018, 136: 106-118.

[8] Y. Zhang, Y. M. Zhu, W. Rong, Y. J. Wu, L. M. Peng*, J. F. Nie, N. Birbilis*. On the precipitation in an Ag-containing Mg-Gd-Zr alloy [J]. Metallurgical and Materials Transactions A, 2018, 49A(2): 673-694.

[9] Y. Zhang, T. Alam, B. Gwalani, W. Rong, R. Banerjee, L. M. Peng*, J. F. Nie, N. Birbilis. On the role of Ag in enhanced age hardening kinetics of Mg-Gd-Ag-Zr alloys [J]. Philosophical Magazine Letters, 2016, 96(6): 212-219.

[10] Y. Zhang, Y.J. Wu*, L.M. Peng, P.H. Fu, F. Huang, W.J. Ding. Microstructure evolution and mechanical properties of an ultra-high strength casting Mg-15.6Gd-1.8Ag-0.4Zr alloy [J]. Journal of Alloys and Compounds, 2014, 615: 703-711.

科研团队

“金属固态相变与原子尺度分析技术”研究团队