学习工作经历
学习经历：
2010/09-2014/06，重庆大学，材料科学与工程学院，博士（在职）
2003/09-2006/07，清华大学，材料科学与工程系，硕士
1999/09-2003/07，清华大学，工程力学系，学士
工作经历：
2020/09至今，重庆大学，材料科学与工程学院, 教授
2015/09-2020/08, 重庆大学，材料科学与工程学院, 副研究员
2012/01-2012/04，丹麦技术大学，访问学者
2008/09-2015/08, 重庆大学，材料科学与工程学院, 讲师
2008/06-2008/09，澳大利亚Monash大学，访问学者
2006/07-2008/08，重庆大学，材料科学与工程学院, 助教
社会兼职
1．中国材料研究学会青年工作委员会第十届理事会理事
2．中国材料与试验团体标准委员会钒钛综合利用委员会委员
3．Materials Research Letters杂志青年编委
4．中国材料大会纳米、异构和梯度材料分会主席
5．Acta Materialia, Scripta Materialia等期刊审稿人
主讲课程
材料X射线衍射与电子显微学
材料现代分析方法
主要研究方向
金属材料超细晶结构设计及强韧化
基于电子显微镜的多维多尺度表征新原理与新技术
科研项目
1．十四五国家重点研发计划项目，原子及微纳尺度多维高通量表征技术
2．十三五国家重点研发计划项目，先进材料多维多尺度高通量表征技术
3．国家自然科学基金专项基金重大科研仪器设备研制专项，三维透射电子显微镜
4．国家自然科学基金面上项目，纳米结构Al-4%Cu合金中Cu原子晶界偏聚与晶界特性关系的三维研究
5．国家自然科学基金重点项目，基于晶界偏聚工程的纳米结构铝合金极限强化研究
6．重庆市技术创新与应用发展专项重点项目，超瞬态电子显微镜核心器件
论文及专著
近五年代表性论文：
(1) 罗旋、韩芳、黄天林、吴桂林、黄晓旭，非均匀层状结构Mg-3Gd合金的微观组织和力学性能，金属学报，2022
(2) S.S Zhang*, H.Q. Du, Z.J. Yao, Z.L. Liu, Y.Y. Zhu, L.F. Shuai, T.L. Huang*, X.X. Huang, X.W. Tao, D. P. Mondal, T. Akopyan, N. Belov，Superior high temperature creep resistance of a cast Al–Mg–Ca-Sc alloy with multi-scale hierarchical microstructures, Materials Science and Engineering: A 850, 143533
(3) W.Q. Zhu, G.L Wu, A. Godfrey*, S. Schmidt, Q.Y. He, Z.Q. Feng, T.L. Huang, L. Zhang, X.X. Huang*, Five-parameter grain boundary character distribution of gold nanoparticles based on three dimensional orientation mapping in the TEM, Scripta Materialia 214, 114677
(4) X. Li, G.L. Wu, L.N. Zhang, D.P. Huang, Y.Q. Li, R.Q. Zhang, M. Li, L. Zhu, J. Guo, T.L. Huang, J. Shen, X.Z. Wei, K. M. Yu, J.C. Dong, M. S Altman, R. S Ruoff, Y.W. Duan, J. Yu, Z.J. Wang, X.X. Huang*, F. Ding*, H.F. Shi*, W.X. Tang, Single-crystal two-dimensional material epitaxy on tailored non-single-crystal substrates, Nature communications 13 (1), 1-8
(5) S.Q. Chen, G.Q. Ma, G.L. Wu*, A. Godfrey, T.L. Huang*, X.X. Huang, Strengthening mechanisms in selective laser melted 316L stainless steel, Materials Science and Engineering: A 832, 142434
(6) R. Yang, Z.Q. Feng*, T.L. Huang, G.L. Wu, A. Godfrey, X.X. Huang*, Unprecedented age-hardening and its structural requirement in a severely deformed Al-Cu-Mg alloy, Scripta Materialia 206, 114240
(7) L Shuai, T Huang*, T Yu*, G Wu, N Hansen, X Huang, Segregation and precipitation stabilizing an ultrafine lamellar-structured Al-0.3% Cu alloy, 2021, Acta Materialia 206, 116595
(8) L.F. Shuai, T.L. Huang*, G.L. Wu, G. Winther, X. Huang, O.V. Mishin*, Unusual through-thickness variations of microstructure and texture in heavily rolled and annealed Al–0.3%Cu, Materials Characterization, 2020, 162: 110173
(9) X. Zhou, Z. Feng, L. Zhu, J. Xu, L. Miyagi, H. Dong, H. Sheng, Y. Wang, Q. Li, Y. Ma, H. Zhang, J. Yan, N. Tamura, M. Kunz, K. Lutker, T. Huang, D. A Hughes, X. Huang*, B. Chen*, High-pressure strengthening in ultrafine-grained metals, Nature, 2020, 579 (7797), 67-72
(10) X. Luo, Z.Q. Feng, T.B. Yu, J.Q. Luo, T.L. Huang, G.L. Wu*, N. Hansen, X.X. Huang*, Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd, 2020, Acta Materialia 183, 398-407
(11) Z Feng, R Fu, C Lin, G Wu, T Huang, L Zhang, X Huang, TEM-based dislocation tomography: Challenges and opportunities, 2020, Current Opinion in Solid State and Materials Science 24 (3), 100833
(12) J Xu, T Huang, H Dong, D Tan, Z Feng, T Wei, RA Susilo, Y Wang, H. Wang, M. Yuan, L. Zhang, S. Wan, Y. Huang, T. Lu, Y. Chen, Z. Chen*, B. Chen*, Structural and mechanical properties of magnesium aluminate nanoceramics under high pressure, Applied Physics Letters, 2020, 117 (4), 041901
(13) X Luo, Z Feng, T Yu, T Huang, R Li, G Wu, N Hansen, X Huang, Microstructural evolution in Mg-3Gd during accumulative roll-bonding, Materials Science and Engineering: A, 2020, 772, 138763
(14) X Luo, Z Feng, R Fu, T Huang, G Wu, X Huang, The synergy of boundary engineering and segregation strategy towards high strength and ductility Mg-3Gd alloy, Journal of Alloys and Compounds, 2020, 819, 153051
(15) X Luo, T Huang, Y Wang, Y Xin, G Wu, Strong and ductile AZ31 Mg alloy with a layered bimodal structure, 2019, Scientific reports 9 (1), 1-9
(16) X Jiang, L Zhang, L Zhang, T Huang, G Wu, X Huang, OV Mishin, Heterogeneous microstructure and enhanced mechanical properties in annealed multilayered IF steel, Materials Science and Engineering A, 2019, 759, 262-271
(17) T.L. Huang*, L.F. Shuai, A. Wakeel, G.L. Wu*, N. Hansen and X.X. Huang, Strengthening Mechanisms and Hall-Petch Stress of Nanostructured Al-0.3%Cu, Acta Materialia, 2018, 156: 369-378
(18) L.F. Shuai, T.L. Huang*, G.L. Wu*, X. Huang and O.V. Mishin，Development of Goss texture in Al-0.3%Cu annealed after heavy rolling， Journal of Alloys and Compounds, 2018, 749: 399-405
(19) Q.Y. He, T.L. Huang*, L.F. Shuai, Y.B. Zhang, G.L. Wu*, X.X. Huang and D. J. Jensen, In-situ Investigation of the Evolution of Annealing Twins in High Purity Aluminium, Scripta Materialia, 2018, 153: 68-72
(20) L Zhang, Z Chen, Y Wang, G Ma, T Huang, G Wu, DJ Jensen, Fabricating interstitial-free steel with simultaneous high strength and good ductility with homogeneous layer and lamella structure, Scripta Materialia, 2017, 141, 111-114
(21) L Xie, TL Huang, YH Wang, GL Wu, N Tsuji, XX Huang, Deformation induced martensitic transformation and its initial microstructure dependence in a high alloyed duplex stainless steel, steel research international, 2017, 88 (12), 1700169
科研团队
属于“纳米金属与先进表征团队”，团队负责人黄晓旭教授，成员：黄天林、车翰卿、张玲、冯宗强、张亮、侯自勇、符潇潇、帅林飞、朱万全
“纳米金属与先进表征” 课题组网站：
http://nmac.cqu.edu.cn/index.htm
