学习工作经历
2018.9-至今 重庆大学材料学院，副教授，硕士生导师，博士生导师
2018.10-2019.11 科技部高新司材料处，挂职
2016.5- 2018.9 重庆大学材料学院，讲师
2011.09-2015.12 重庆大学材料学院，材料科学与工程，工学博士
2013.09-2015.03 University of Waterloo机械电子工程系， 联合培养
社会兼职
重庆金属学会会员
主讲课程
科技写作、金属凝固原理、材料成型科技实践
主要研究方向
（1）超轻镁锂合金塑性变形过程中的组织演变、数学模型及数值模拟(CAD/CAE)
（2）搅拌摩擦加工制备石墨烯、碳纳米管等增强镁基复合材料
（3）汽车用材料瞬态变形过程中的数值仿真及失效分析
（4）高性能玻璃纤维、玄武岩纤维增强复合材料成型方法及性能研究
（5）镁基储氢材料、新能源材料制备技术
科研项目
(1) 国家重点研发计划项目，新型结构功能一体化镁合金变形加工材制造关键技术，2022-2026，主研
(2) 重庆市技术创新与应用发展专项重点项目，高端LED用低涨缩高反射覆铜板研发及应用，2023-2026，主持
(3) 国家自然科学基金面上项目，双相镁锂合金形变诱导相变过程中的变体选择与织构遗传研究，2023-2026，主持
(4) 自然科学基金横向项目，玄武岩纤维新材料研发与应用，2022-2026，主持
(5) 重庆市自然科学基金面上项目，镁铝共挤出构筑镁合金耐蚀表层的成形机理及调控研究，2019-2021，主持
(6) 重庆市留创计划项目，cx2018057，2018-2020，主持
(7) 重庆大学中央高校基本科研业务费项目 2 项，主持
(8) 重庆市重点产业共性关键技术创新专项重点研发项目，cstc2017zdcy-zdyfX0070，连续纤维增强热塑性复合材料开发及产业化，2017/07-2019/06，主研
(9) 重庆市重点产业共性关键技术创新专项重点研发项目，cstc2018jszx-cyzd0223，数控在线模压装备及长纤维增强热塑性复合材料汽车零部件开发与应用，2018/07-2020/06，主研
论文及专著
[1] K. Yang, W. Bai, B. Li, H. Chen, G. Li, G. Wei, J. Liu, Thermal Deformation Behavior and Microstructural Evolution of Multicomponent Mg-Li-Zn-Al-Y Alloys under Hot Compression, Materials, 17 (2024).
[2] G. Li, Y. Yang, B. Ran, H. Chen, Y. Wang, W. Xie, G. Wei, Microstructure evolution and strengthening mechanisms of high-strength Mg-5Al-1Mn-0.5Zn-0.5Ca by rotary forging, J. Alloys Compd., 981 (2024).
[3] B. Li, X. Sun, H. Chen, Y. Yang, Q. Luo, X. Yang, Y. Chen, G. Wei, Q. Li, F. Pan, Enhancing Mg-Li alloy hydrogen storage kinetics by adding molecular sieve via friction stir processing, J. Mater. Sci. Technol., 180 (2024) 45-54.
[4] F. Kong, H. Feng, H. Chen, Y. Lin, Y. Wang, W. Xie, G. Wei, Y. Yang, X. Peng, Non-basal Slips Mediated Dynamic Recrystallization Promote Synergistic Strengthening and Toughening of Centrifugal Casting Mg–1.1Mn–0.5Al Alloy via High Strain Rolling, Metals and Materials International, 30 (2024) 517-532.
[5] X. Cui, W. Liu, Y. Yang, Y. Zhang, R. Li, G. Wei, Q. Li, B. Jiang, X. Peng, F. Pan, High-strength Mg-6Li-3Al-0.4Ce alloy fabricated by rotary swaging, Scripta Mater., 243 (2024).
[6] X. Cui, Y. Guo, Y. Yang, Y. Zhu, G. Zhou, T. Cao, Q. Luo, G. Wei, Q. Li, B. Jiang, X. Peng, F. Pan, High-ductility Mg-9Li-1Zn-2Gd-1.2Mn alloy prepared via traditional hot extrusion, Materials Science and Engineering: A, 893 (2024).
[7] M. Zhang, K. Yang, G. Wei, W. Xie, Y. Yang, B. Li, H. Chen, Q. Yang, AZ31/GNP magnesium composites with excellent comprehensive mechanical properties prepared by friction stir processing and rolling, Journal of Materials Research and Technology, 25 (2023) 3078-3092.
[8] Q. Yang, D. Zhang, P. Peng, G. Wei, J. Zhang, B. Jiang, F. Pan, Asymmetric Extrusion Technology of Mg Alloy: A Review, Materials, 16 (2023).
[9] B. Li, H. Chen, G. Li, G. Wei, W. Xie, Strengthening and toughening mechanisms of CNTs/Mg–Al composites prepared via powder metallurgy combined with hot extrusion, Vacuum, 214 (2023).
[10] B. Li, H. Chen, X. Ke, G. Wei, Q. Yang, Improving the Mechanical Properties of Mg-5Al-2Ca-1Mn-0.5Zn Alloy through Rotary Swaging, Materials, 16 (2023).
[11] F. Kong, X. Zhang, H. Chen, H. Liu, C. Fan, W. Xie, G. Wei, Improving Interfacial Strength and Corrosion Resistance of Fiber Metal Laminates by Phosphating Magnesium Substrates, Journal of Materials Engineering and Performance, 32 (2023) 7050-7062.
[12] F. Kong, W. Xie, G. Wei, Z. Ma, H. Chen, C. Fan, Microstructure evaluation and thermal deformation behaviours of wrought magnesium alloys, Materials Science and Technology (United Kingdom), 39 (2023) 283-299.
[13] F. Kong, H. Chen, X. Cui, B. Li, Y. Yang, X. Peng, W. Xie, G. Wei, Texture weakening and ductility improvement of Mg-1.1Mn-0.5Al alloy via medium temperature-high reduction rolling: twinning variants selection and dynamic recrystallization mechanism, Journal of Materials Research and Technology, 25 (2023) 3243-3257.
[14] H. Chen, M. Zhang, F. Kong, B. Li, X. Cui, Y. Huang, N. Hort, R. Willumeit-Römer, W. Xie, G. Wei, Effect of extrusion and rotary swaging on the microstructural evolution and properties of Mg-5Li-5.3Al-0.7Si alloy, Materials Science and Engineering: A, 885 (2023).
[15] H. Chen, Y. Yang, F. Hu, X. Liu, F. Kong, X. Cui, W. Xie, G. Wei, Y. Yang, X. Peng, Y. Huang, Improvement of severe plastic deformation realized by several passes rotary swaging in the microstructure and properties of Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy, Materials Science and Engineering: A, 865 (2023).
[16] H. Chen, Y. Yang, C. Hu, G. Zhou, H. Shi, G. Jiang, Y. Huang, N. Hort, W. Xie, G. Wei, Hot deformation behavior of novel high-strength Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy, International Journal of Minerals, Metallurgy and Materials, 30 (2023) 2397-2410.
[17] H. Chen, C. Hu, F. Hu, X. Liu, F. Kong, W. Xie, G. Wei, Y. Yang, X. Peng, Y. Huang, N. Hort, Effect of rotary swaging on the microstructure and mechanical properties of high-strength Mg-Mn-Al-Ca-Zn alloys, Mater. Charact., 196 (2023).
[18] G. Zhou, Y. Yang, L. Sun, J. Liu, H. Deng, C. Wen, G. Wei, B. Jiang, X. Peng, F. Pan, Tailoring the microstructure, mechanical properties and damping capacities of Mg–4Li–3Al–0.3Mn alloy via hot extrusion, Journal of Materials Research and Technology, 19 (2022) 4197-4208.
[19] Z. Ma, Y. Yang, Q. Peng, X. Fu, G. Wei, W. Xie, X. Peng, Effects of Centrifugal Casting and Hot Rolling on Microstructure and Mechanical Properties of Mg-10Gd-3Y-1Sn Alloy, Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 51 (2022) 858-865.
[20] Z. Ma, G. Li, Z. Su, G. Wei, Y. Huang, N. Hort, A. Hadadzadeh, M.A. Wells, Hot deformation behavior and microstructural evolution for dual-phase Mg–9Li–3Al alloys, Journal of Materials Research and Technology, 19 (2022) 3536-3545.
[21] Z. Ma, G. Li, Q. Peng, X. Peng, D. Chen, H. Zhang, Y. Yang, G. Wei, W. Xie, Microstructural evolution and enhanced mechanical properties of Mg–Gd–Y–Zn–Zr alloy via centrifugal casting, ring-rolling and aging, Journal of Magnesium and Alloys, 10 (2022) 119-128.
[22] J. Liu, C. Li, H. Lu, Y. He, Y. Wang, G. Wei, Deformation behavior and phase transformation of a dual-phase Mg−8.9Li−2.7Al-0.85Si alloy under compression test at elevated temperatures, J. Alloys Compd., 927 (2022).
[23] F. Kong, Y. Yang, H. Chen, H. Liu, C. Fan, W. Xie, G. Wei, Dynamic recrystallization and deformation constitutive analysis of Mg–Zn-Nd-Zr alloys during hot rolling, Heliyon, 8 (2022).
[24] F. Hu, H. Chen, R. Liu, G. Wei, F. Qiu, H. Li, W. Xie, Microstructural evolution and its effects on the mechanical properties of fine-grained Mg-3Gd during tension, Materials Science and Engineering: A, 855 (2022).
[25] G.L. Gu, X.N. Ke, F.P. Hu, S.J. Zhao, G.B. Wei, Y. Yang, X.D. Peng, W.D. Xie, Fine-grained Mg–1Mn–0.5Al–0.5Ca–0.5Zn alloy with high strength and good ductility fabricated by conventional extrusion, Transactions of Nonferrous Metals Society of China (English Edition), 32 (2022) 483-492.
[26] H. Chen, L. Sun, X. Ke, F. Kong, W. Xie, G. Wei, Y. Yang, X. Peng, Microstructure evolution and mechanical properties of the Mg–5Al–1Mn-0.5Zn-xCa alloys prepared by regular extrusion, Materials Science and Engineering: A, 858 (2022).
[27] X. Bai, C. Hu, G. Wei, G. Li, H. Chen, B. Li, Good strength-plasticity compatibility of GNP/AZ31 composites fabricated by FSP: Microstructural evolution and mechanical properties, Journal of Materials Research and Technology, 20 (2022) 3995-4007.
[28] Z. Wang, X. Wang, F. Liu, F. Hu, H. Chen, G. Wei, W. Liu, W. Xie, Different deformation behaviour between zirconia and yttria particles in dispersion strengthened platinum-20% rhodium alloys, Johnson Matthey Technology Review, 65 (2021) 112-119.
[29] Z. Ma, Q. Peng, G. Wei, Y. Yang, T. Xu, W. Xie, G. Liu, X. Peng, Improvement of Microstructure, Mechanical Property and Corrosion Resistance of Mg–9Li–3Al–1Ca Alloy Through Centrifugal Casting, Metals and Materials International, 27 (2021) 4498-4509.
[30] G. Li, X. Bai, Q. Peng, G. Wei, Z. Ma, Hot deformation behavior of ultralight dual-phase mg-6li alloy: Constitutive model and hot processing maps, Metals, 11 (2021).
[31] H. Deng, Y. Yang, M. Li, X. Xiong, G. Wei, W. Xie, B. Jiang, X. Peng, F. Pan, Effect of Mn content on the microstructure and mechanical properties of Mg–6Li–4Zn-xMn alloys, Progress in Natural Science: Materials International, 31 (2021) 583-590.
专利
[1]一种硅铜合金热还原制备有色金属的方法，谢卫东，魏国兵，苏中华，彭晓东，专利号：ZL 201010125151.1
[2]一种碳热还原制镁方法 谢卫东，胡发平，张玺，汪浩，魏国兵，彭晓东，潘佳，马欣，专利号：ZL 201310162803.2
[3]一种碳热还原制备镁的装置及方法 谢卫东，潘佳，马欣，彭晓东，汪浩，魏国兵，胡发平，张玺，专利号：ZL201310162668.1
[4]一种热还原微粉制备有色金属的方法，谢卫东，魏国兵，彭晓东，汤燕，公开号：CN101643849A
[5]一种真空热还原制备有色金属的方法，谢卫东，魏国兵，彭晓东，苏中华，汤燕，赵凯阳，公开号：CN101643850A
表彰及奖励
2023年度 团队博士生陈浩、硕士研究生张萌获得研究生国家奖学金
科研团队
彭晓东教授、谢卫东教授、杨艳教授
