学习工作经历
1993.9-1997.9 昆明理工大学热加工工艺及设备专业学习，获学士学位；
1997.9-2000.5 昆明理工大学材料加工工程专业学习，获硕士学位；
2000.9-2003.6 重庆大学材料加工工程专业学习，获博士学位；
2003.6- 2005.9 重庆大学材料科学与工程学院讲师。
2004.6-2006.7 重庆大学冶金工程博士后流动站在职博士后；
2005.9- 2009.9 重庆大学材料科学与工程学院副教授。
2006.9-2007.8 芬兰赫尔辛基工业大学访问学者。
2009.9-至今 重庆大学材料科学与工程学院教授。
2017.12-2018.4 美国北卡罗来纳州立大学访问学者
个人简历：
黄光胜，重庆大学教授/博导，国家镁合金材料工程技术研究中心副主任，中国材料研究学会镁合金分会理事，中国有色金属学会新能源材料发展工作委员会委员，重庆材料学会理事，曾在美国北卡罗莱纳州立大学和芬兰赫尔辛基工业大学做访问研究。主要从事镁离子电池关键材料与电池系统、镁合金的塑性机理与塑性加工技术，承担和参与了国家重点研发计划、国家863、国家科技攻关和支撑计划项目、国家自然科学基金以及重庆市重点科技计划等国家和省部级项目20 余项，累计发表学术论文210 余篇，授权发明专利20 项，获省部级一等奖5项。
社会兼职
中国材料学会镁分会理事
中国有色金属学会新能源材料发展工作委员会委员
重庆材料学会理事
主讲课程
1.本科生课程：轧制成形设备、材料设计
2.研究生课程：镁合金塑性加工理论与技术
主要研究方向
1.镁二次电池及关键材料
2.镁合金塑性成形理论与技术
科研项目
主要从事镁离子电池关键材料与电池系统、镁合金的塑性机理与塑性加工技术，承担和参与了国家重点研发计划、国家科技攻关和支撑计划项目、国家自然科学基金以及重庆市重点科技计划等国家和省部级项目20 余项。
论文及专著
1.T. Wen, B. Qu, S. Tan, G. Huang, J. Song, Z. Wang, J. Wang, A. Tang, F. Pan, Rational design of artificial interphase buffer layer with 3D porous channel for uniform deposition in magnesium metal anodes, Energy Storage Materials 55 (2023) 816-825.
2.X.F. Ma, H.Y. Li, X. Zhu, W. Ren, X. Zhang, J. Diao, B. Xie, G. Huang, J. Wang, F. Pan, Switchable and Strain-Releasable Mg-Ion Diffusion Nanohighway Enables High-Capacity and Long-Life Pyrovanadate Cathode, Small 18(27) (2022) e2202250.
3.X. Huang, J. Wen, J. Lei, G. Huang, F. Pan, L. Li, Facile and Economic Synthesis of Robust Non-Nucleophilic Electrolyte for High-Performance Rechargeable Magnesium Batteries, ACS Appl Mater Interfaces 14(7) (2022) 8906-8915.
4.D. Gu, Y. Yuan, J. Liu, D. Li, W. Zhang, L. Wu, F. Cao, J. Wang, G. Huang, F. Pan, The electrochemical properties of bismuth-antimony-tin alloy anodes for magnesium ion batteries, Journal of Power Sources 548 (2022).
5.S.-s. Liu, H. Liu, B.-x. Zhang, G.-s. Huang, X. Chen, A.-t. Tang, B. Jiang, F.-s. Pan, Effects of extrusion temperature on microstructure evolution and mechanical properties of heterogeneous Mg?Gd alloy laminates via accumulated extrusion bonding, Transactions of Nonferrous Metals Society of China 32(7) (2022) 2190-2204.
6.S. Liu, J. Zhang, H. Yang, X. Chen, G. Huang, A. Tang, X. Chen, B. Jiang, F. Pan, Optimization in strength-ductility of heterogeneous Mg-13Gd alloy via small extrusion ratio combined with pre-aging, Materials Science and Engineering: A 833 (2022).
7.S. Liu, F. Yang, H. Yang, G. Huang, A. Tang, X. Chen, B. Jiang, F. Pan, High-resolution mapping of the strain heterogeneity in heterogeneous and homogeneous structured Mg 13Gd alloy, Materials Characterization 193 (2022).
8.W. Wang, J. Zhang, J. Li, X. Chen, S. Liu, G. Huang, X. Chen, K. Zheng, B. Jiang, F. Pan, Influence of different extrusion methods on the microstructure, texture evolution and mechanical property of Ti /AZ31 composite, Materials Science and Engineering: A (2022).
9.S. Liu, D. Xia, H. Yang, G. Huang, F. Yang, X. Chen, A. Tang, B. Jiang, F. Pan, Mechanical properties and deformation mechanism in Mg-Gd alloy laminate with dual-heterostructure grain size and texture, International Journal of Plasticity (2022).
10.S. Liu, H. Liu, X. Chen, G. Huang, Q. Zou, A. Tang, B. Jiang, Y. Zhu, F. Pan, Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength–ductility synergy, Journal of Materials Science & Technology 113 (2022) 271-286.
11.S. Liu, Y. Chen, H. Yang, G. Huang, X. Chen, A. Tang, B. Jiang, F. Pan, Revealing the role of heterostructural parameters in hetero-deformation induced stress of Mg–13Gd alloy, Materials Science and Engineering: A 839 (2022).
12.X. Chen, B. Zhang, Q. Zou, G. Huang, S. Liu, J. Zhang, A. Tang, B. Jiang, F. Pan, Design of pure aluminum laminates with heterostructures for extraordinary strength-ductility synergy, Journal of Materials Science & Technology 100 (2022) 193-205.
13.X. Chen, W. Wang, H. Yang, G. Huang, D. Xia, A. Tang, B. Jiang, H.N. Han, F. Pan, Microstructure evolution, mechanical properties and deformation characteristics of ultrafine-grained annealed pure aluminum, Materials Science and Engineering: A 846 (2022).
14.J. Zhang, Y. Huang, J. Xiang, G. Huang, X. Chen, H. Zhou, B. Jiang, A. Tang, F. Pan, Characterization of newly developed friction stir-arc welding method for AM60/AZ31 dissimilar Mg alloy, Materials Science and Engineering: A 800 (2021).
15.C. Zhang, L. Wu, Z. Zhao, G. Huang, B. Jiang, A. Atrens, F. Pan, Effect of the Al–Si eutectic on the microstructure and corrosion behavior of the single-phase Mg alloy Mg–4Li, Journal of Magnesium and Alloys 9(4) (2021) 1339-1348.
16.S. Liu, B. Zhang, H. Liu, G. Huang, Q. Zou, A. Tang, B. Jiang, F. Pan, Achieving strength-ductility synergy of AZ91 extruded sheet by balancing dual-heterostructure of grain size and precipitates, Materials Science and Engineering: A 827 (2021).
17.T. Han, J. Zou, G. Huang, L. Ma, C. Che, W. Jia, L. Wang, F. Pan, Improved strength and ductility of AZ31B Mg alloy sheets processed by accumulated extrusion bonding with artificial cooling, Journal of Magnesium and Alloys 9(5) (2021) 1715-1724.
18.X. Chen, W.-z. Wang, J.-l. Zhang, G.-s. Huang, S.-s. Liu, A.-t. Tang, B. Jiang, F.-s. Pan, Tailoring AZ91 laminates for combination of strength and ductility, Transactions of Nonferrous Metals Society of China 31(12) (2021) 3703-3718.
19.Q. Zhao, R. Wang, Y. Zhang, G. Huang, B. Jiang, C. Xu, F. Pan, The design of Co3S4@MXene heterostructure as sulfur host to promote the electrochemical kinetics for reversible magnesium-sulfur batteries, Journal of Magnesium and Alloys 9(1) (2021) 78-89.
20.Q. Zhang, Y. Hu, J. Wang, F. Pan, Low-temperatures synthesis of CuS nanospheres as cathode material for magnesium second batteries, Journal of Magnesium and Alloys (2021).
21.H. Yang, L. Wu, B. Jiang, W. Liu, J. Song, G. Huang, D. Zhang, F. Pan, Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of α-Mg based Mg-Li alloys for primary Mg-air batteries, Journal of Materials Science & Technology 62 (2021) 128-138.
22.J. Zhang, K. Liu, G. Huang, X. Chen, D. Xia, B. Jiang, A. Tang, F. Pan, Optimizing the mechanical properties of friction stir welded dissimilar joint of AM60 and AZ31 alloys by controlling deformation behavior, Materials Science and Engineering: A 773 (2020).
23.J. Zhang, X. Chen, D. Xia, G. Huang, A. Tang, B. Jiang, F. Pan, Improving performance of friction stir welded AZ31/AM60 dissimilar joint by adjusting texture distribution and microstructure, Materials Science and Engineering: A 778 (2020).
24.C. Zhang, L. Wu, G. Huang, Y. Huang, B. Jiang, A. Atrens, F. Pan, Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ31, Journal of Alloys and Compounds 823 (2020).
25.D. Xia, J. Zhang, X. Chen, G. Huang, B. Jiang, A. Tang, S. Gavras, Y. Huang, N. Hort, F. Pan, Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature, Materials Science and Engineering: A 789 (2020).
26.X. Chen, J. Zhang, D. Xia, G. Huang, K. Liu, B. Jiang, A. Tang, F. Pan, Microstructure and mechanical properties of 1060/7050 laminated composite produced via cross accumulative extrusion bonding and subsequent aging, Journal of Alloys and Compounds 826 (2020).
27.X. Chen, D. Xia, J. Zhang, G. Huang, K. Liu, A. Tang, B. Jiang, F. Pan, Ultrafine-grained Al–Zn–Mg–Cu alloy processed via cross accumulative extrusion bonding and subsequent aging: Microstructure and mechanical properties, Journal of Alloys and Compounds 846 (2020).
28.X. Chen, S. Liu, K. Liu, G. Huang, J. Zhang, A. Tang, B. Jiang, F. Pan, Extra strengthening and strain hardening in coarse-grain/ultrafine-grain laminates, Materials Letters 272 (2020).
29.J. Zhang, G. Huang, S. Liu, Y. Xie, G. Wang, B. Jiang, A. Tang, F. Pan, Microstructure evolution and mechanical properties of friction stir welded dissimilar joints of as-extruded AM60 and AZ31 alloys, Materials Science and Engineering: A 759 (2019) 479-489.
30.C. Zhang, L. Wu, G. Huang, L. Chen, D. Xia, B. Jiang, A. Atrens, F. Pan, Effects of Fe concentration on microstructure and corrosion of Mg-6Al-1Zn-xFe alloys for fracturing balls applications, Journal of Materials Science & Technology 35(9) (2019) 2086-2098.
31.D. Xia, G. Huang, S. Liu, A. Tang, S. Gavras, Y. Huang, N. Hort, B. Jiang, F. Pan, Microscopic deformation compatibility during biaxial tension in AZ31 Mg alloy rolled sheet at room temperature, Materials Science and Engineering: A 756 (2019) 1-10.
32.D. Xia, X. Chen, G. Huang, B. Jiang, A. Tang, H. Yang, S. Gavras, Y. Huang, N. Hort, F. Pan, Calculation of Schmid factor in Mg alloys: Influence of stress state, Scripta Materialia 171 (2019) 31-35.
33.T. Han, G. Huang, L. Ma, G. Wang, L. Wang, F. Pan, Evolution of microstructure and mechanical properties of AZ31 Mg alloy sheets processed by accumulated extrusion bonding with different relative orientation, Journal of Alloys and Compounds 784 (2019) 584-591.
34.X. Chen, G.-s. Huang, S.-s. Liu, T.-z. Han, B. Jiang, A.-t. Tang, Y.-t. Zhu, F.-s. Pan, Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding, Transactions of Nonferrous Metals Society of China 29(3) (2019) 437-447.
35.D. Xia, G. Huang, Q. Deng, B. Jiang, S. Liu, F. Pan, Influence of stress state on microstructure evolution of AZ31 Mg alloy rolled sheet during deformation at room temperature, Materials Science and Engineering: A 715 (2018) 379-388.
36.T. Han, G. Huang, Q. Deng, G. Wang, B. Jiang, A. Tang, Y. Zhu, F. Pan, Grain refining and mechanical properties of AZ31 alloy processed by accumulated extrusion bonding, Journal of Alloys and Compounds 745 (2018) 599-608.
37.G. Wang, G. Huang, X. Chen, Q. Deng, A. Tang, B. Jiang, F. Pan, Effects of Zn addition on the mechanical properties and texture of extruded Mg-Zn-Ca-Ce magnesium alloy sheets, Materials Science and Engineering: A 705 (2017) 46-54.
38.D.-k. Liu, G.-s. Huang, G.-l. Gong, G.-g. Wang, F.-s. Pan, Influence of different rolling routes on mechanical anisotropy and formability of commercially pure titanium sheet, Transactions of Nonferrous Metals Society of China 27(6) (2017) 1306-1312.
授权专利
1. 潘复生, 黄光胜, 韩廷状, 王冠刚, 王游根；一种连续弯曲改善镁合金薄板冲压性能的方法. 中国发明专利，申请号：201510332444.X，申请日：2015-06-16. 公开号：104862627A, 公开日：2015-08-26. 授权号：CN 104862627 B，授权日：2016-08-24.
2. 黄光胜, 陈琳, 夏大彪, 刘定凯, 赵炎春, 潘复生；一种含铁镁基复合材料及其制备方法和应用. 中国发明专利，申请号：201510701085.0，申请日：2015-10-26. 公开号：105177383A, 公开日：2015-12-23. 授权号：CN 105177383 B，授权日：2017-10-31.
3. 黄光胜, 潘复生, 韩廷状, 张诚, 王冠刚, 赵炎春；一种板材剧烈塑性变形的累积挤压装置及其使用方法. 中国发明专利，申请号：201610457467.8，申请日：2016-06-22. 公开号：106064181A，公开日：2016-11-02. 授权号：CN 106064181 B，授权日：2018-07-31.
4. 潘复生, 黄光胜, 邓钱元, 夏大彪, 陈祥；一种金属熔体的净化装置. 中国发明专利，申请号：201710366670.9, 申请日：2017-05-23. 公开号：107012334A, 公开日：2017-08-04. 授权号：CN 107012334 B，授权日：2018-09-11.
5. 黄光胜, 夏大彪, 陈琳, 潘复生；一种简易的、拉伸比例可调式双轴同步拉伸装置及方法；中国发明专利，申请号：201610107468.X，申请日：2016-02-26. 公开号：105758722A.授权号：CN 105758722 B，授权日：2019-05-17.
6. 黄光胜, 夏大彪, 刘帅帅, 谢誉璐, 潘复生. 一种双向压缩提高板材成形性能的方法及装置. 中国发明专利，申请号：201810048902.0, 申请日：2018-01-18. 公开号：1 08265248A, 公开日：2018-07-10. 授权号：CN 108265248 B，授权日：2019-12-13.
7. 黄光胜, 夏大彪, 谢誉璐, 刘帅帅, 潘复生. 一种比例可调双向同步压缩实验原位观察装置. 中国发明专利，申请号：201810048882.7, 申请日：2018-01-18. 公开号：108225917A, 公开日：2018-06-29. 授权号：CN 108225917 B，授权日：2020-09-15.
表彰及奖励
获省部级一等奖5项
科研团队
国家镁合金材料工程技术研究中心
